01
Floor plan and occupancy
Use this model to discuss column grid, floor system, stability, fire protection, façade and service coordination. Final room sizes, circulation and occupancy must be confirmed on a dimensioned drawing.
Factory-direct Steel Structure Building
Steel Frame Structures
Multi-storey or industrial steel framing system configured around grids, floor loads, stability, connections and architectural interfaces.
Multi-storey steel framingBeam-column connection designFloor and façade coordination
Factory configurableCompact customisation
Open a category to view choicesChoose your options
Custom product options
Steel Frame Structures
Multi-storey or industrial steel framing system configured around grids, floor loads, stability, connections and architectural interfaces. Compare layout…
Custom quotationChoose the options below. Our team will confirm feasibility, drawings and price.
Your selections
Request configured price & layout →
No payment required. Final materials, colors and layout are confirmed against the approved quotation and drawing.
Product terminology and buyer intent
Ask about this exact modelHow buyers compare Steel Frame Structures
steel frame structures is the primary topic for this page. Related descriptions such as structural steel frame building, multi-storey steel frame, and beam and column steel system are explained here only when they help buyers distinguish the model; they are not separate product claims.
02
Application and project fit
Relevant project searches include industrial, commercial, residential or mixed-use frames. Suitability still depends on site, climate, approvals, access and the selected fit-out.
03
Price and factory quotation
Buyers asking for a factory price, wholesale quantity or custom configuration should compare the complete scope, not one headline figure. Quantity, materials, utilities, packing and destination logistics change the quotation.
04
Technical evidence
Request current dimensions, floor plan, material schedule, installation information, packing data and applicable project documents before ordering.
Why buyers consider this model
Request a configured quotation →Steel Frame Structures: project value before headline price
A beam-and-column framing system for multi-storey, industrial or mixed-use buildings. The right purchase decision comes from matching the model to the site, operating plan, destination requirements and complete supply boundary.
Layout & occupancy
Confirm structural grid, floors, loads, stability system, fire protection, façade, services, vibration and connection responsibility.
Structure & envelope
Define geometry, span, grid, design code, loads, steel grade, connection philosophy, corrosion protection, fire strategy, cladding interfaces and erection sequence.
Destination fit
Do not quote from a picture alone. Site data, design criteria, geotechnical assumptions, supply boundary, temporary works and professional responsibilities must be defined.
Delivery & installation
Fabrication segments, trial assembly where required, marking, packing, transport limits, lifting studies and site erection methodology must be coordinated together.
Commercial objective
A beam-and-column framing system for multi-storey, industrial or mixed-use buildings.
Written quotation
Separate the base product, upgrades, packing, freight, installation support, local work and exclusions so suppliers can be compared fairly.
Best-fit project scenarios
Turn Steel Frame Structures into a project-specific solution
These are starting directions, not fixed packages. Choose one scenario and send the site, quantity, layout and destination requirements for a relevant proposal.
| Project scenario | Recommended starting configuration | Buyer value | Confirm before quotation |
|---|---|---|---|
| Industrial or logistics project | Operational grid, clear height, cranes or equipment, loading doors and envelope system | Align the structure with material flow and future operating needs | Design loads, fire strategy, corrosion class, expansion and erection access |
| Long-span public or transport structure | Three-dimensional geometry, complex nodes, movement joints and staged erection | Create large column-free or landmark spaces | Authority design criteria, analysis model, temporary supports and monitoring |
| Multi-storey or mixed-use frame | Column grid, floor system, stability system, façade and service coordination | Accelerate fabrication and erection through repeatable members and connections | Floor vibration, fire protection, connections, tolerances and interface responsibility |
Technical content to complete
Ask for current specificationSteel Frame Structures specification and buyer verification table
The reserved rows below show exactly what information should be added when current factory data and approved drawings are available. Unverified figures are intentionally not invented.
| Specification item | Content for this product | Evidence needed |
|---|---|---|
| Product title | Steel Frame Structures | Confirmed |
| Primary use and occupants | Add intended use, operating model and maximum occupants | Buyer input required |
| Dimensions and usable area | Multi-storey steel framing — replace with current folded, transport and finished dimensions | Approved drawing required |
| Suggested planning direction | Confirm structural grid, floors, loads, stability system, fire protection, façade, services, vibration and connection responsibility. | Layout drawing required |
| Structure and connections | Add steel grade, member sizes or structural system, connection method and protective finish | Factory data required |
| Wall, roof and insulation | Add panel type, thickness, insulation core, roof build-up, sealing and climate options | Factory data required |
| Doors, windows and glazing | Add sizes, materials, glass build-up, opening direction, screens and hardware | Opening schedule required |
| Electrical system | Add destination voltage, frequency, sockets, distribution board, lighting and included equipment | Destination input required |
| Plumbing and wet areas | Add water and drainage points, bathroom fixtures, kitchen scope, waterproofing and hot-water option | Scope confirmation required |
| Interior and furniture | Add floor, wall, ceiling, cabinetry, beds, desks, appliances and loose furniture | Finish schedule required |
| Exterior options | Add colors, cladding, roof, canopy, deck, terrace, guardrails, signage or renewable-energy interfaces | Option list required |
| Packing and loading | Add packed condition, package count, protection method, loading plan and unloading requirements | Logistics plan required |
| Installation and site work | Fabrication segments, trial assembly where required, marking, packing, transport limits, lifting studies and site erection methodology must be coordinated together. | Responsibility matrix required |
| Documents and inspection | Add drawings, manuals, packing list, inspection records and current project-specific test or certification scope | Document register required |
| Model | Steel Frame Structures |
|---|---|
| Building system | Steel Structure Building |
| Structure and dimensions | Model and project specification; confirm on approved drawing and quotation |
| Wall and insulation | Panel and insulation options selected for climate and intended use |
| Doors and windows | Standard or project-specific configuration |
| Electrical and plumbing | Prepared to the agreed scope and destination requirements |
| Interior fit-out | Shell, selected fit-out or configured package depending on model |
| Installation | Site access, foundations, lifting and connections coordinated by product system |
Quotation checklist
Send the information that changes the design
- Country, destination port and exact site
- Intended use, occupants and unit quantity
- Preferred floor plan and fit-out level
- Climate, design code and document needs
- Site access, crane or assembly constraints
- Target production and delivery schedule
Scope and price
Compare a complete supply boundary
A low headline price may exclude important items. Ask every supplier to separate structure, envelope, utilities, fit-out, accessories, packing, freight, installation support and local works.
01
Configuration
Approved dimensions, layout, materials, openings and finishes.
02
Transport
Packing form, container plan, special transport and destination handling.
03
Site work
Approvals, foundations, lifting, assembly and utility connections.
04
Quality check
Dimensions, sealing, finishes, utilities, accessories and packing records.
05
Documents
Drawings, manuals and current certification or test scope where applicable.
06
After-sales
Issue reporting, remote guidance, spare parts and agreed warranty terms.
Model FAQ
Steel Frame Structures buying questions
Is this model suitable for my project?
Suitability depends on use, occupancy, site, climate, access and local rules. Share these details before confirming Steel Frame Structures.
Can I change the layout and finishes?
Options vary by structure, but doors, windows, insulation, colors, utilities and fit-out can be reviewed during configuration.
How is the unit delivered and installed?
Delivery and installation follow the Steel Structure Building system. The quotation should identify packing, lifting, site labor and buyer-supplied work.
What documents can be provided?
Request the current drawings, material specifications, test or certification scope needed for your product and destination. Do not assume one document applies to every configuration.
What affects the final price?
Quantity, structure, insulation, openings, electrical standard, bathroom, kitchen, furniture, accessories, packing, trade terms and freight all affect price.
What should be ready before production?
Approve the floor plan, specification, colors, utility points, supply boundary, packing method and destination information in writing.
What purchasing advantage does Steel Frame Structures offer?
A beam-and-column framing system for multi-storey, industrial or mixed-use buildings. The actual advantage depends on the approved configuration, quantity, transport plan and destination requirements.
What layout or engineering point should be decided first?
Confirm structural grid, floors, loads, stability system, fire protection, façade, services, vibration and connection responsibility.
Which configuration details should be included in the quotation?
Define geometry, span, grid, design code, loads, steel grade, connection philosophy, corrosion protection, fire strategy, cladding interfaces and erection sequence.
What evidence should I request before ordering?
Request current dimensioned drawings, material and finish schedules, utility scope, packing information, installation guidance, inspection records and any project-specific test or certification documents required for the destination.
Free project recommendation
Get the right model, configuration and quotation scope
Share six quick project details. The sales team can use them to prepare a more relevant first response instead of sending a generic price list.
- Product and size recommendation
- Suggested layout and fit-out scope
- Quotation inclusions and option list
- Packing, delivery and site-preparation questions
Free layout support: ask about a layout proposal within 3 working days after the requirements are confirmed.
WhatsApp: +86 17563695938Email: contact@hshouse.comAddress: No. 1099, Gongye 1st Street, Weicheng District, Weifang, Shandong, China