01
Floor plan and occupancy
Use this model to discuss horizontally or vertically connected modules creating wider rooms and service routes. Final room sizes, circulation and occupancy must be confirmed on a dimensioned drawing.
Factory-direct Detachable Container Houses
Combined Modular Detachable Container House
Multiple detachable container modules connected horizontally or vertically to create larger residential, commercial and hospitality spaces.
Multi-module combinationsConnected interior layoutsExpandable project capacity
Factory configurableCompact customisation
Open a category to view choicesChoose your options
Custom product options
Combined Modular Detachable Container House
Multiple detachable container modules connected horizontally or vertically to create larger residential, commercial and hospitality spaces. Compare layout…
Custom quotationChoose the options below. Our team will confirm feasibility, drawings and price.
Your selections
Request configured price & layout →
No payment required. Final materials, colors and layout are confirmed against the approved quotation and drawing.
Product terminology and buyer intent
Ask about this exact modelHow buyers compare Combined Modular Detachable Container House
combined modular detachable container house is the primary topic for this page. Related descriptions such as connected flat-pack building, multi-module container house, and modular container complex are explained here only when they help buyers distinguish the model; they are not separate product claims.
02
Application and project fit
Relevant project searches include large offices, accommodation blocks, hotels, clinics or commercial buildings. Suitability still depends on site, climate, approvals, access and the selected fit-out.
03
Price and factory quotation
Buyers asking for a factory price, wholesale quantity or custom configuration should compare the complete scope, not one headline figure. Quantity, materials, utilities, packing and destination logistics change the quotation.
04
Technical evidence
Request current dimensions, floor plan, material schedule, installation information, packing data and applicable project documents before ordering.
Why buyers consider this model
Request a configured quotation →Combined Modular Detachable Container House: project value before headline price
A connected-module system for creating rooms wider or longer than a single container bay. The right purchase decision comes from matching the model to the site, operating plan, destination requirements and complete supply boundary.
Layout & occupancy
Map every removed wall, transfer member, roof and floor joint, service route and waterproof connection on coordinated drawings.
Structure & envelope
Select frame connection, wall panel, insulation, doors, windows, room use, bathroom pod, finishes, electrical package and module combination.
Destination fit
Compare the complete component list, connection details, steel and panel specification, packing density, crew requirements and weather sealing.
Delivery & installation
Frames and panels are packed for delivery and assembled on site; foundations, unloading, inventory control, tools, labor and final sealing need coordination.
Commercial objective
A connected-module system for creating rooms wider or longer than a single container bay.
Written quotation
Separate the base product, upgrades, packing, freight, installation support, local work and exclusions so suppliers can be compared fairly.
Best-fit project scenarios
Turn Combined Modular Detachable Container House into a project-specific solution
These are starting directions, not fixed packages. Choose one scenario and send the site, quantity, layout and destination requirements for a relevant proposal.
| Project scenario | Recommended starting configuration | Buyer value | Confirm before quotation |
|---|---|---|---|
| Worker accommodation or project camp | Repeatable sleeping rooms, sanitary modules, offices and shared welfare buildings | Scale a complete facility by repeating controlled module types | Occupancy, fire and escape strategy, sanitation capacity and phased installation |
| Site office or operations building | Private offices, open workspaces, meeting rooms, reception and storage | Add or rearrange modules as the project organization changes | Power/data, HVAC, acoustic privacy, access and furniture loads |
| Commercial or hospitality module | Upgraded façade, larger glazing, premium finishes and connected rooms | Move beyond a basic site box toward a customer-facing modular space | Façade interfaces, waterproof connections, accessibility and maintenance |
Technical content to complete
Ask for current specificationCombined Modular Detachable Container House specification and buyer verification table
The reserved rows below show exactly what information should be added when current factory data and approved drawings are available. Unverified figures are intentionally not invented.
| Specification item | Content for this product | Evidence needed |
|---|---|---|
| Product title | Combined Modular Detachable Container House | Confirmed |
| Primary use and occupants | Add intended use, operating model and maximum occupants | Buyer input required |
| Dimensions and usable area | Multi-module combinations — replace with current folded, transport and finished dimensions | Approved drawing required |
| Suggested planning direction | Map every removed wall, transfer member, roof and floor joint, service route and waterproof connection on coordinated drawings. | Layout drawing required |
| Structure and connections | Add steel grade, member sizes or structural system, connection method and protective finish | Factory data required |
| Wall, roof and insulation | Add panel type, thickness, insulation core, roof build-up, sealing and climate options | Factory data required |
| Doors, windows and glazing | Add sizes, materials, glass build-up, opening direction, screens and hardware | Opening schedule required |
| Electrical system | Add destination voltage, frequency, sockets, distribution board, lighting and included equipment | Destination input required |
| Plumbing and wet areas | Add water and drainage points, bathroom fixtures, kitchen scope, waterproofing and hot-water option | Scope confirmation required |
| Interior and furniture | Add floor, wall, ceiling, cabinetry, beds, desks, appliances and loose furniture | Finish schedule required |
| Exterior options | Add colors, cladding, roof, canopy, deck, terrace, guardrails, signage or renewable-energy interfaces | Option list required |
| Packing and loading | Add packed condition, package count, protection method, loading plan and unloading requirements | Logistics plan required |
| Installation and site work | Frames and panels are packed for delivery and assembled on site; foundations, unloading, inventory control, tools, labor and final sealing need coordination. | Responsibility matrix required |
| Documents and inspection | Add drawings, manuals, packing list, inspection records and current project-specific test or certification scope | Document register required |
| Model | Combined Modular Detachable Container House |
|---|---|
| Building system | Detachable Container Houses |
| Structure and dimensions | Model and project specification; confirm on approved drawing and quotation |
| Wall and insulation | Panel and insulation options selected for climate and intended use |
| Doors and windows | Standard or project-specific configuration |
| Electrical and plumbing | Prepared to the agreed scope and destination requirements |
| Interior fit-out | Shell, selected fit-out or configured package depending on model |
| Installation | Site access, foundations, lifting and connections coordinated by product system |
Quotation checklist
Send the information that changes the design
- Country, destination port and exact site
- Intended use, occupants and unit quantity
- Preferred floor plan and fit-out level
- Climate, design code and document needs
- Site access, crane or assembly constraints
- Target production and delivery schedule
Scope and price
Compare a complete supply boundary
A low headline price may exclude important items. Ask every supplier to separate structure, envelope, utilities, fit-out, accessories, packing, freight, installation support and local works.
01
Configuration
Approved dimensions, layout, materials, openings and finishes.
02
Transport
Packing form, container plan, special transport and destination handling.
03
Site work
Approvals, foundations, lifting, assembly and utility connections.
04
Quality check
Dimensions, sealing, finishes, utilities, accessories and packing records.
05
Documents
Drawings, manuals and current certification or test scope where applicable.
06
After-sales
Issue reporting, remote guidance, spare parts and agreed warranty terms.
Model FAQ
Combined Modular Detachable Container House buying questions
Is this model suitable for my project?
Suitability depends on use, occupancy, site, climate, access and local rules. Share these details before confirming Combined Modular Detachable Container House.
Can I change the layout and finishes?
Options vary by structure, but doors, windows, insulation, colors, utilities and fit-out can be reviewed during configuration.
How is the unit delivered and installed?
Delivery and installation follow the Detachable Container Houses system. The quotation should identify packing, lifting, site labor and buyer-supplied work.
What documents can be provided?
Request the current drawings, material specifications, test or certification scope needed for your product and destination. Do not assume one document applies to every configuration.
What affects the final price?
Quantity, structure, insulation, openings, electrical standard, bathroom, kitchen, furniture, accessories, packing, trade terms and freight all affect price.
What should be ready before production?
Approve the floor plan, specification, colors, utility points, supply boundary, packing method and destination information in writing.
What purchasing advantage does Combined Modular Detachable Container House offer?
A connected-module system for creating rooms wider or longer than a single container bay. The actual advantage depends on the approved configuration, quantity, transport plan and destination requirements.
What layout or engineering point should be decided first?
Map every removed wall, transfer member, roof and floor joint, service route and waterproof connection on coordinated drawings.
Which configuration details should be included in the quotation?
Select frame connection, wall panel, insulation, doors, windows, room use, bathroom pod, finishes, electrical package and module combination.
What evidence should I request before ordering?
Request current dimensioned drawings, material and finish schedules, utility scope, packing information, installation guidance, inspection records and any project-specific test or certification documents required for the destination.
Free project recommendation
Get the right model, configuration and quotation scope
Share six quick project details. The sales team can use them to prepare a more relevant first response instead of sending a generic price list.
- Product and size recommendation
- Suggested layout and fit-out scope
- Quotation inclusions and option list
- Packing, delivery and site-preparation questions
Free layout support: ask about a layout proposal within 3 working days after the requirements are confirmed.
WhatsApp: +86 17563695938Email: contact@hshouse.comAddress: No. 1099, Gongye 1st Street, Weicheng District, Weifang, Shandong, China